Husqvarna WT 15 Mode D'emploi page 12

Stopping
• Press the button again to shut the pump down.
The pump shuts down automatically if the container runs
out of water.
Trouble shooting
Problem Procedure
The diode on the Battery flat
machine flashes
red three times
and it does not
start.
The machine does The battery is in
not start even the wrong battery
if the battery is holder.
charged.
The machine does Air bubble in the
not pump water pump house.
when it starts,
Blocked filter
but the pump is
mesh in the pump
running.
holder.
The machine does Blockage in the
not pump water pump, possible
when it starts, and blocked filter
the pump is not mesh.
running.
Water frozen in
the pump.
Low water flow Blocked filter
from the machine. mesh in the pump
holder.
The product is intended to be used with a number of
different power cutters and core drills on the market.
This product is not recommended for high performance
machines requiring high water flows/water pressures e.g.
diamond chain saws.
12 - English
OPERATING
Steps
Charging the
battery
Check that the
battery is in the
right-hand battery
holder and not
in the "parking
space".
Wait one minute
and start again.
Remove and clean
the pump.
Remove and clean
the pump.
Thaw the machine
slowly.
Remove and clean
the pump.
R297123