Varde In-Line 47 Instructions De Montage page 12

Lighting
Optænding i pejseindsatsen er meget nemt takket være 2-trinsgrebet.
| Light the fi re, close the door and place the handle in the lighting
position.
| Light the fi re, close the door and place the handle in the lighting
position.
Stoking
| When stoking, it is recommended that the door is not opened to
insert more wood until only a few embers remain in the fi rebox.
The presence of fl ames means that smoke and gases are still being
produced, and there is thereby a risk of smoke downdraught.
| The air supply can be adjusted while the fi re is burning using the air
inlet, as shown.
22
DANSK | ENGLISH
Door
The fi replace insert's door can easily be reversed to suit the surroundings.
| Remove the door, and move the hinges and the closing system to the
opposite side.
| Reverse the door, then the door's handle and glass. The handle should
point downward, with the Varde Ovne logo the right way up.
| Replace the door and adjust if necessary.
Maintenance
Your fi replace insert will require very little maintenance.
| Replace the vermiculite plates or base slab if cracks or breaks
appear with a width of more than ½ cm, as the lifetime of the
fi replace insert will otherwise be greatly reduced.
| Adjust the door as necessary to ensure the optimum effi ciency of
the fi replace insert.
| DEUTSCH | FRANÇAIS
23