Philips HQ5824 Mode D'emploi page 7

C
6
C
7
1
2
8
For extra thorough cleaning, clean the shaving
B
heads by putting them in a degreasing liquid (e.g.
alcohol) every six months.To remove the shaving
heads, follow steps 1 to 4 described above. After
cleaning, lubricate the central point on the inside
of the guards with a drop of sewing machine oil to
prevent wear of the shaving heads.
Trimmer
Clean the trimmer every time you have used it.
1
C
2
Brush the guard.
Put the shaving heads back into the shaving
unit. Put the retaining frame back into the
shaving unit (1) and turn the wheel
clockwise (2).
Put the shaving unit back onto the shaver.
Switch the shaver off, remove the mains
plug from the wall socket and pull the
appliance plug out of the shaver.
Clean the trimmer with the brush
supplied.
ENGLISH
9