Yamaha DM 2000 Mode D'emploi page 348

Use 256 if the recall destination or store source is a single
data item.
Effect is 0:Effect 1–7:Effect 8, GEQ is 0:GEQ1–5:GEQ6
If the store destination is 16383 (0x3FFF), this indicates
that the library data has been changed by a external
cause (i.e., loading from SmartMedia)
(only transmitted by the DM2000)
*2) This is also transmitted when a program that has not been
assigned to the [Program change table] is recalled.
(Normally this would be transmitted as a program
change message.)
12.3.15 Parameter change (Function call: title)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the title of the specified memory/library will be
changed
Transmission
In response to a request, a Parameter Change message will be transmitted
on the [Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 00000110 7F
Function call Library
ADDRESS 00010000 10
Address UL (function)
0100aaaa 4a
Address LU (number H)
0nnnnnnn nn
Address LL (number L)
0nnnnnnn nn
title 1
DATA 0ddddddd dd
: :
title x(depend on the library)
0ddddddd dd
End of exclusive
EOX 11110111 F7
function
SCENE LIB TITLE 0x40
EQ LIB TITLE 0x41
GATE LIB TITLE 0x42
COMP LIB TITLE 0x43
EFF LIB TITLE 0x44
GEQ LIB TITLE 0x45
CHANNEL LIB TITLE 0x46
INPATCH LIB TITLE 0x47
OUTPATCH LIB TITLE 0x48
Bus to Stereo LIB TITLE 0x49
Surround Monitor LIB TITLE 0x4A 0-32(0:response only)
AUTOMIX LIB TITLE 0x4B
12.3.16 Parameter request (Function call: title)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, a Parameter Change message will be transmitted on
the [Rx CH].
Refer to the above table for the Functions and Numbers.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 00000110 7F
Function call Library
ADDRESS 00010000 10
Address UL (function)
0100aaaa 4a
Address LU (number H)
0nnnnnnn nn
Address LL (number L)
0nnnnnnn nn
End of exclusive
EOX 11110111 F7
number size
0-99, 256(0:response 16
only)
1-200(1-40:response only) 16
1-128(1-4:response only) 16
1-128(1-36:response only) 16
1-128(1-52:response only) 16
0-128(0:response only) 16
0-128(0-1:response only) 16
0-32(0:response only) 16
0-32(0:response only) 16
0-32(0:response only) 16
16
1-16 16
Format Details
12.3.17 Parameter change (Function call: Scene/Library
Clear)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the specified memory/library will be stored/recalled.
Transmission
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 00000110 7F
Function call Library
ADDRESS 00010000 10
Address UL (function)
0110aaaa 6a
Address LU (number H)
0nnnnnnn nn
Address LL (number L)
0nnnnnnn nn
End of exclusive
EOX 11110111 F7
function
SCENE LIB CLEAR
EQ LIB CLEAR
GATE LIB CLEAR
COMP LIB CLEAR
EFF LIB CLEAR
GEQ LIB CLEAR
CHANNEL LIB CLEAR
INPATCH LIB CLEAR
OUTPATCH LIB CLEAR
Bus to Stereo LIB CLEAR
Surround Monitor LIB CLEAR
AUTOMIX LIB CLEAR
12.3.18 Parameter change (Function call: pair, copy)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS. This is echoed if [Param-
eter change ECHO] is ON.
When this is received, pairing will be enabled/disabled for the specified
channel. (Items other than PAIR are reserved for future use.)
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 00000110 7F
Function call Pair
ADDRESS 00010001 11
Function
0000aaaa 0a
Source channel number H
DATA 0ddddddd dd
Source channel number L
0ddddddd dd
Destination channel number H
0ddddddd dd
Destination channel number L
0ddddddd dd
End of exclusive
EOX 11110111 F7
function
PAIR ON with COPY
PAIR ON with RESET BOTH
PAIR OFF
*1)0:CH1 - 95:CH96, 128:BUS1 - 135:BUS8, 256:AUX1 -
267:AUX12, 384:MATRIX1L - 391:MATRIX4R, 512:STE-
REO L - 513:STEREO R
Effect is 0:Effect 1–7:Effect 8, GEQ is 0:GEQ1–5:GEQ6
In the case of PAIR, you must specify channels for which pair-
ing is possible.
In the case of PAIR ON with COPY, you must specify Source
Channel as the copy source, and Destination Channel as
the copy destination.
12.3.19 Parameter change (Function call Event: Effect)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
333
number
0x60 1-99
0x61 41-200
0x62 5-128
0x63 37-128
0x64 1-128
0x65 0-128
0x66 2-128
0x67 0-32
0x68 0-32
0x69 0-32
0x6A 0-32
0x6B 1-16
Channel
0x00 *1)
0x01 *1)
0x02 *1)
DM2000—Mode d'emploi