Dacor DRF425 Série Manuel D'utilisation page 25

07 Deodorizer Reset (3 sec)
Deodorizer Reset
08 Door Alarm / °C  °F (3 sec)
Door Alarm
°C  °F
09 Override (3 sec)
Override
Dacor_T-TYPE_BRF9000M_DA68-03574J-01_EN.indd 25
After about 18 months of using the original deodorizer filter, the
filter indicator blinks red to remind you that the filter needs to
be replaced. When this happens, replace the filter, and then press
and hold Deodorizer Reset for 3 seconds. The filter lifecycle will
be reset and the filter indicator turns off.
You can enable or disable the door alarm by pressing Door Alarm.
When Door Alarm is enabled and a door is left open for more than
2 minutes, the alarm will sound and the alarm indicator will blink.
The Door Alarm function is enabled by factory default.
You can use the Door Alarm button to switch the temperature
scale between Celsius and Fahrenheit.
To switch the temperature scale, press and hold Door Alarm for
3 seconds.
The Override function activates/deactivates Smart Grid.
Press and hold Override for 3 seconds to set/clear the Override
function.
English 25
2020-12-11 4:57:46