Olivetti Ink Jet Fax Lab 145D Manuel D'utilisation page 86

DECLARATION
MANUFACTURER'S CE DECLARATION of CONFORMITY according to ISO/IEC 17050
OLIVETTI S.p.A
Déclare sous sa responsabilité exclusive que :
Declares under its sole responsibility that:
le produit décrit dans ce manuel
the product described in this guide
est CONFORME à la Directive 1999/5/CE du 9 mars 1999
is in compliance with directive 99/5/EC dated 9
et respecte les conditions requises essentielles de Compatibilité électromagnétique et de sécurité prévues par les
Directives :
fulfill the essential requirements of Electromagnetic Compatibility and of Electrical Safety as prescribed by the
Directives:
89/336/CEE du 3 mai 1989 et modifications successives (Directive 92/31/CEE du 28 avril 1992 et Directive
93/68/CEE du 22 juillet 1993) ;
rd
89/336/EEC dated 3 May 1989 with subsequent amendments (Directive 92/31/EEC dated 28
nd
93/68/EEC dated 22 July 1993);
2006/95/CE du 27 décembre 2006 ;
th
2006/95/EC dated 27 December 2006;
car il a été conçu et construit conformément aux Normes harmonisées suivantes :
since designed and manufactured in compliance with the following European Harmonized Standards:
EN 55022/A2 : 2003 (Limits and methods of measurements of radio interference characteristics of Information Technology
Equipment) / Class B;
EN 61000-3-2/A1 : 2002 (Electromagnetic Compatibility (EMC) - Part 2 : Limits - Section 2 : Limits for harmonic current
emissions (equipment input current ≤ 16 A per phase);
EN 61000-3-3/A1 : 2002 (Electromagnetic Compatibility (EMC) - Part 3 : Limits - Section 3 : Limitation of voltage
fluctuations and flicker in low voltage supply systems for equipment with rated current up to and including 16A);
EN 55024/A1 : 2002 (Electromagnetic Compatibility - Information technology equipment - Immunity characteristics -
Limits and methods of measurement);
EN 60950-1/A1 : 2004 (Safety of Information Technology Equipment, including electrical business equipment).
Le produit respecte également les normes suivantes :
Moreover the model is in compliance with following Standards:
ETSI TBR 38 : May 1998 Requirements for a terminal equipment incorporating an analogue handset function capable of
supporting the justified case service when connected to the analogue interface of the PSTN in Europe.
ETSI ES 203 021 : January 2006 Access and Terminal (AT); Harmonized basic attachment requirements for Terminals for
connection to analogue interfaces of the Telephone Networks.
ETSI EN 301 406 : 2003 Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for Digital Enhanced
Cordless Telecommunications covering essential requirements under article 3.2 of the R&TTE Directive Generic radio.
ETSI EN 301 489-6 : 2002 Electromagnetic compatibility and radio spectrum Matters (ERM); Electromagnetic
compatibility (EMC) standard for radio equipment and services; Part6: specific conditions for Digital Enhanced Cordless
Telecommunications (DECT) equipment.
ETSI EN 301 489-1 : 2005 Electromagnetic compatibility and radio spectrum Matters (ERM); Electromagnetic
compatibility (EMC) standard for radio equipment and services; Part1: Common technical requirements.
La conformité aux conditions requises essentielles susmentionnées est attestée par le Label CE apposé sur le
produit même.
Compliance with the above mentioned essential requirements is shown by affixing the CE marking on the product.
Scarmagno, le 8 mars 2007
th
Scarmagno, 8 march 2007
Remarques : 1) Le Label CE a été apposé en 2007.
Notes: 1) CE Marking has been affixed in 2007.
2) Le Système qualité est conforme à la série de normes UNI EN ISO 9000.
2) The Quality System is in compliance with the UNI EN ISO 9000 series of Standards.
Olivetti S.p.A. Sede Sociale Ivrea,Via Jervis,77 – Cap. Soc. Euro 154.000.000 – C.C.I.A.A. Torino n. 547040 – Trib Ivrea Reg. Soc. n. 1927 – Cod. Fisc. e Part. IVA 02298700010
CE
DE CONFORMITE du CONSTRUCTEUR selon ISO/IEC 17050
Via Jervis, 77 - IVREA (TO) - ITALY
th
march 1999
th
April 1992 and Directive
Olivetti S.p.A.