Factory Reset - auna Intelligence DAB+ Mode D'emploi

EN
30
Alarm frequency
Press "Previous" or "Next" button to select "Once/Weekends/Weekdays/
Daily" alarm mode, then press "Enter" button to confirm.
Sleep Set
Press "Previous" or "Next" button to select "Off/120/90/60/45/30/15/5",
then press "Enter" button to confirm.

Factory reset

Press "Previous" or "Next" button to select "Yes" or "No", then press "Enter"
button to confirm.
System Version
Press the "Enter" button, then you can check the version number.
DAB Scan
Press "Enter" button, then unit will start scanning automatically and save
stations with good signal.
Note: Press "Menu" button, then you can go back to the menu setting
quickly.
DAB Station Information
When listening to a DAB station, press the "Menu" button repeatedly to
scroll through and display different program information:
• Time and Date: Displays the time and date information provided by the
broadcaster.
• Bit Rate: The date rate which the signal is being transmitted.
• Dynamic Label Segment (DLS): Displays scrolling text information
supplied by the broadcaster.
• Signal Strength: Displays a signal bar with the strength of the current
station.
• Signal Error: Provides details of the signal error rate.
• Channel and Frequency: Displays the station's transmission channel
number and frequency.
• PTY (Program Type): Shows the type and description of the program
provided by the DAB station.