Vitalmaxx CF-2408 Mode D'emploi page 14

EN
The device may not be used by people who are insensitive to
■
heat or cold and may not be used by other vulnerable people
who are unable to react to overheating or undercooling.
Do not use the device if it is wet or damp. It must be completely
■
dry before it is used.
No safety pins or other sharp or pointed objects must be at-
■
tached to the device or inserted into it.
Do not switch on the device when it is folded up. It must always
■
be spread out prior to use to prevent the build-up of heat.
Always check the device and accessories for damage or wear
■
before putting them into operation. It may only be used if it is
undamaged and does not display any signs of wear and tear.
Do not make any modifi cations to the device.
■
If the device or accessories are damaged, they must be re-
■
placed by the manufacturer, customer service department or a
similarly qualifi ed person (e.g. specialist workshop) in order to
avoid any hazards.
The device is not designed to be operated with an external timer
■
or a separate remote control system.
The device must always be disconnected from the mains power
■
when it is left unattended and before assembling, disassem-
bling and cleaning the device.
Always allow the device to cool down completely before it is
■
folded up and / or stored away.
To ensure that the device is not damaged, fold it up loosely, do
■
not press it together fi rmly or bend it. Do not place any objects,
animals or people on the folded device.
The device should only be stored out of the reach of children and
■
animals. Incorrect operation may lead to injuries and electric
shocks.
14