Publicité
Les langues disponibles
Les langues disponibles
Remove the filter and filter holder.
Empty the dust compartment and clean it with soapy water if necessary.
To clean the filter you can detach it from its holder and gently knock the dust off over a
dustbin. You can then take the filter and clean it in soapsuds if necessary. If you use
soapsuds, rinse the filter with clear water and let it dry before putting it back into the
appliance.
Once the filter is clean and dry, put it back in its holder. Then reinsert the filter and filter
holder in the dust collector. The correct position of the filter and filter holder is extremely
important, as it guarantees the tightness between the dust compartment and the motor.
If the filter is too dirty or damaged, it must be replaced. To do so, please contact the
nearest customer service.
After having replaced the filter, attach the dust compartment to the motor unit.
To clean the floor brush, slide the rolling brush and remove it. Clean the rolling brush and
reinstall it into the floor brush.
To clean the wheels, use a screwdriver to unscrew them and take them out of their
compartment. Remove the dirt and put the wheels back by pressing them down.
To clean the mop cloth, remove it and wash it. When it is completely dry, put it back. If the
mop cloth is too dirty or damaged, it must be replaced. To do so, please contact the
nearest customer service.
Clean and rinse the water tank.
The surface of the motor block and the stick can be cleaned with a slightly damp cloth.
20
Publicité
