Exquisit BP8602sw Mode D'emploi page 18

ASSEMBLING THE VACUUM CLEANER
 Remove the packaging from the appliance and its attachments.
Your appliance contains following attachments:
 charger
 floor brush
 crevice tool/upholstery brush
 stick
 The dust collector always has to be attached to the motor unit before using the
appliance. If the dust collector is not mounted, attach it to the motor unit and make sure it
fits into place.
 You can use the vacuum cleaner in two ways:
1) You can use the appliance without stick as handheld vacuum cleaner.
2) Attach the stick to the body of the appliance until it clicks into place. Then you can
use the appliance as a stick vacuum cleaner.
3) To remove the stick, press the stick release button and pull the appliance out.
 Attach the desired suction tool (floor brush, small upholstery brush or crevice tool) to the
suction opening of the dust collector if necessary.
18