KS Tools 550.1500 Notice D'utilisation page 7

8. Disposal
The Tool is to be disposed of or recycled in accordance with the legislation of the respective country.
9. Guarantee
The KS Tools Werkzeuge-Maschinen GmbH guarantee applies for all tools that are used under normal usage conditions.
The following are excluded from the guarantee:
• Consumables e.g. any type of cutting tools, cutting inserts and disks, cutting and scraping tools, brooms, brushes,
files, batteries, bits or bit sockets, rotor blades in pneumatic devices, isolators on heating coils, any type of fuses,
carbon brushes, etc.
• Faulty functioning of parts that show usage-related or other natural wear and tear, as well as tool defects that can
be traced back to usage-related or other natural wear and tear.
• Defects in the tool that can be traced back to a failure to observe the operating instructions, improper use, use under
abnormal environmental conditions or unsuitable operating conditions, overloading or improper maintenance.
Also defects in tools caused by the use of accessory parts or other parts that are not KS Tools original parts.
• Tools which have been modified or equipped with additions.
• Minor deviations from the intended quality that are however insignificant for the value and suitability for use of the tool.
The guarantee period is 12 months in cases of industrial or equal use.
The guarantee period starts on the date of purchase by the commercial end customer. The date of the original purchase
receipt is decisive. For technical products with limited guarantee types A, B and C, the user must principally submit the
purchase receipt in addition to the serial number of the device, if present.
The guarantee applies under consideration of the guarantee type for the duration specified in the price list valid on the
day the product was purchase.
If no guarantee claim exists for the product (expiration of the guarantee time, guarantee exclusion for the reasons listed
in Sec. 2) but the repair is still possible, this will only be carried our following approval of the cost estimate by the user.