Headphone Socket - Sangean WR-50 Mode D'emploi

Headphone socket

A 3.5mm Headphone socket located on the rear of your radio is provided for use with headphones.
Inserting headphones will automatically mute the internal loudspeaker. Please be aware that the
GB
sensitivity of headphones can vary widely. We therefore recommend setting the volume to a low
level before connecting headphones to the radio.
Note:
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Subwoofer Line out socket (3.5mm Jack)
A 3.5mm Subwoofer Line Out socket located on the rear of your radio is provided for connecting
the audio signal to an external amplifier or powered subwoofer. Inserting an audio cable into this
socket will not mute the internal loudspeaker. Set the volume control on the radio to minimum if
desired.
18