Reverse Door - FAR R5219W Manuel D'utilisation

ENGLISH
Defrost regularly or when ice is more than
5mm thick. Thick ice covering the inner sides
significantly increases energy use.
The combination of the drawers, baskets and
shelves shown in the device description is
optimal for efficient energy savings. Changing
the combination proposition could alter the
efficiency.

REVERSE DOOR

This refrigerator can be opened either from the
left or right side. The default way of opening the
door is from the left side. If you want to open
the door from the right side, please follow the
instructions below.
Tools Required: Phillips style screwdriver / Flat
blated screwdriver / Hexagonal spanner.
• If you want to have the door swing reversed,
we recommend that you contact a qualified
technician. You should only try to reverse
the door yourself if you believe that you are
qualified to do so.
• Ensure the unit is unplugged and empty.
• Adjust the two levelling feet to their highest
position.
GB-16
• To take the door off it is necessary to tilt the
unit backwards. You should rest the unit on
something solid so that it will not slip during
the door reversing process.
• All parts removed must be saved to do the
reinstallation of the door.
• The refrigerator inclination angle should be
less than 45°.
• Do not lay the unit fat as this may damage the
coolant system.
• You should rest the Appliance on something
solid e.g. a chair just below the top panel.
• We recommend that 2 people handle the unit
during assembly.
Follow the following stages to reverse the door
from its initial position.
Deposit doors
Tool required: Philips screwdriver, Flat bladed
screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the
unit backwards. You should rest the unit on
something solid so that it will not slip during
the door reversing process.
• All parts removed must be saved to do the
ENGLISH
GB-17