The Chiller Compartment; Reverse Door - FAR RT2015 Manuel D'utilisation

ENGLISH
Changes of the ambient temperature affect temperature in the interior of the
appliance so choose a correct setting of the temperature control knob, depending on
your ambient conditions.
In the STOP (OFF) position the appliance does not operate (the cooling system is
switched off), but power supply is not interrupted.
Please Note: If the appliance is switched off you must wait at least 5 minutes before
restarting the appliance or re-inserting the plug into the wall outlet. This is to allow
the protection device in the compressor to reset.
If the compressor fails to start correctly remove the plug and wait for 5 minutes
before you try again then the compressor should restart normally.
The storage temperature may be affected by:
– The room temperature
– How often the door is opened
– How much food is stored
– Position of the appliance
When you set the correct temperature, all these factors mentioned above shall be
taken into account.
TEMPERATURE INDICATE
In order to help you get the correct adjustment of your device, it is equipped with a
temperature gauge placed in the coldest area.
For the proper storage of food in your refrigerator and in particular in the coldest
area, make sure that "OK" appears in the temperature indicator.
The symbol on the left side indicates the location of the coldest area
of your refrigerator. It defines the height of this area.
If "OK" is not displayed, the average temperature in this area will be
very high. You ought to adjust the thermostat to a colder setting.
For every modification of your thermostat, you are supposed to wait for the
stabilization of the temperature inside the unit before proceeding, if necessary,
to a new setting. Do change the position of the thermostat gradually and wait at
least 12 hours before re-checking.
NOTE: after charging the device for fresh food or after repeated or prolonged door
openings, it is normal that the inscription "OK" does not appear in the temperature
indicator.
Wait at least 12 hours before readjusting the thermostat.
GB-8

THE CHILLER COMPARTMENT

This compartment is designed for production of ice cubes and short-term storage
(3-4 days at most) of some commercially frozen foods.
The temperature in this compartment does not get cold enough to freeze food safely
for long periods of time and works best when the food is already frozen.
By design, this chiller compartment is not a true freezer, and may not keep ice cream
frozen, or freeze items.
A colder setting may be used for these items, but other items in the refrigerator may
also be affected.
The chiller door is susceptible to breaking due to excessive ice build up. This part is
not covered under your warranty. Be sure to defrost when the ice reaches 6cm thick
even if the defrosting is automatic.

REVERSE DOOR

Tools Required: Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
• Ensure the unit is unplugged and empty.
• Adjust the two levelling feet to their highest position.
• To take the door of it is necessary to tilt the unit backwards. You should rest the
unit on something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit fat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
Follow the following stages to reverse the door from its initial position.
Remove the right top hinge cove r and unscrew the top hinge.
1.
ENGLISH
GB-9