Using The Optional Ac Adapter - Omron MICRO Air NE-U22V Manuel D'instructions

USING THE OPTIONAL AC ADAPTER

The device is designed not to draw power from the batteries when the
AC Adapter is used. The AC Adapter is not a battery charger.
To connect the AC Adapter to the Main Unit
1. Place the Main Unit on the AC Adapter
Connection Stand as shown in the
illustration below.
NOTE: It will click and lock to the stand.
2. Insert the AC Adapter Power Plug into
a 120V electrical outlet.
Do not insert or remove the Power
Plug from the electrical outlet
with wet hands.
To remove the AC Adapter from the Main Unit
(1) Disconnect the AC Adapter Power Plug
from the electrical outlet.
(2) Push on both sides of the Connection
Stand to unlock the Main Unit.
(3) Remove the Main Unit.
Disconnect the Power Plug from the
electrical outlet when not in use.
Conne ction is completed .
(3) Remove
10
(1) Unplug
(2) Push both ends