Technical Data; First Use And Charging The Powerpacks - therm-ic Supermax + Mode D'emploi

Powerpacks are water-resistant. If you have
attached the Powerpacks to your shoes, the packs
should always be connected to the heatable soles
when outdoors (even if not switched on). This will
prevent moisture and dirt from entering the
connecting socket or plug. If water does enter the
connectors, drain the Powerpack and let it dry.
For recharging, only use the supplied Therm-ic
Supermax Global Charger. It is designed for indoor
use and may not be exposed to damp
surroundings.
Do not insert any metal or other object into
connecting sockets or plugs as this could cause
damage to the unit.
As the contact pins on the Powerpack are also
conductive even when disconnected, you must not
store the Powerpack together with metallic objects
(such as paperclips, aluminium foil, etc.).
Do not use the unit if you discover any damage to
connecting cables or other parts. Do not make any
modifications to the unit or use it for any
unintended purpose. Repairs to the unit or its
connecting leads are only to be carried out by the
manufacturer.
If questions or problems arise, please get in touch
with your dealer or the manufacturer.
Dispose of used Powerpacks properly.
Do not throw the Powerpacks into an open fire, as
there is a risk of explosion
TECHNI CA L DATA
Supermax Global Charger (available accessory from
Therm-ic):
Input: 100V-240V ~ (50 - 60Hz), 400mA
Output: 2 x 500 mA
FI RST US E AND CHARGI NG THE
P O WE R PA C KS
Preparing the charger:
Press the appropriate adapter into the slot on the
back of the charger until it locks in with an audible
click.
9