EGO POWER+ SNT2400E Manuel De L'opérateur page 6

EN
SPECIFICATIONS
Voltage
Clearing Width
Intake Height
Wheel Size
Weight
Recommended
Operating Temperature
Recommended Storage
Temperature
Measured sound power
level L
WA
Sound pressure level at
operator's ear L
PA
Guaranteed sound
power level L
WA
(measured according to
2000/14/EC)
Valuation of vibration a :
h
DESCRIPTION
KNOW YOUR SNOW BLOWER (Fig. A1 & A2)
1. Side Rail
2. Battery Cover
3. Battery Compartment
4. Wheels
5. Skid Shoe
6. LED Headlights
7. Deck
8. Chute Cleaning Tool
9. Snow-Discharge Chute
10. Chute Deflector
11. Rear Handle
12. LED Sidelights
13. Auger Switch Trigger
14. Right Main Handle
15. Auger Speed-Control Lever
16. Safety Button
17. Self-Propel Speed-Control Lever
18. Self-Propel Trigger
19. Left Main Handle
20. LED Light Button
21. LED Indicator
6
56-VOLT LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400E
56 V
61cm
51cm
38cm
68 kg
-20°C-10°C
-20°C-70°C
96.61 dB(A)
K=1.6 dB(A)
82.5 dB(A)
K=4 dB(A)
98 dB(A)
Left 0.3 m/s
2
handle K=1.5 m/s 2
Right 0.4 m/s
2
handle K=1.5 m/s
2
22. Chute-Rotation Handle
23. Chute-Deflector Handle
24. Auger
25. Scraper Bar
26. Battery-Release Button
27. Electric Contacts
PACKING LIST (FIG. A3)
ASSEMBLY
MOUNTING/DETACHING WHEEL
1. Position the snow blower according to Fig. B for easier
mounting.
2. Remove the outer gasket and wheel-locking pin from
the shaft.
3. Assemble the wheel and outer gasket. Lock them with
the wheel-locking pin.
Notice:
Check the wheel before installation to make sure
the arrow of the wheel is forward (Fig. B).
B-1 Outer Gasket B-2
TO INSTALL THE HANDLE ASSEMBLY
NOTICE:
The handle assembly requires assembly before
operating the snow blower (Fig.C1)
C-1 Locking Knob C-2
Loosen the four locking knobs and pull out the bolts. Save
them for reassembly.
Choose a comfortable operating position according to
your height (Fig. C2). The handle assembly can be set to
three different heights (Fig. C3 & Fig. C4 & Fig. C5).
Upper Operating Position as Fig. C3
Middle Operating Position as Fig. C4
Lower Operating Position as Fig. C5
TO INSTALL THE SNOWDISCHARGE CHUTE
ASSEMBLY
WARNING: Never operate the snow blower without
the complete discharge chute in place.
Wheel-Locking pin
Handle Assembly