Chef's Grill RT2417S-1 Mode D'emploi page 25

18. Remove the LP orifices first with the orifice
removal tool, then install the NG orifice. Make
sure you are using the correct orifice, marked
"1.37".
When this step completed, install the main
burners back to the firebox and secure to the
bracket with the R-pins.
Make sure the orifices are aligned with the
burners and the ignition pins are installed in their
original positions. Check the sparks before
operating the grill.
Change to 10 ft. NG hose
19. Take the regulator off from the manifold and
replace it with 10-ft. natural gas hose. Please
make sure the hose is securely fastened.
Adjust valve control screw
20. Pull all the knobs off of valve stems. Adjust the
screw in the valve hole using the flathead
screwdriver. Turn screws two complete turns
counterclockwise.
21. To complete conversion, re-install all knobs,
return heat diffusers to firebox, followed by the
grates and warming rack.
18
19
20
Valve hole
25
1.37