Connecting To A Tv; Connecting Using An Optical Cable - Samsung HW-NW700 Mode D'emploi

04 CONNECTING TO A TV

Hear TV sound from your Soundbar through wired or wireless connections.
• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using
the TV's remote control.
– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when
you connect the Soundbar to the TV using an optical cable.
– This function also allows you to use the TV menu to adjust the sound field and various settings
as well as the volume and mute.

Connecting using an Optical Cable

When the audio in a broadcast is encoded in Dolby Digital and the "Digital Output Audio Format" on
your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on
the TV is changed, you will experience better sound quality. (The TV menu may use different words for
Dolby Digital and PCM depending on the TV manufacturer.)
1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV
with a digital optical cable (not supplied).
2. Press the button on the bottom panel or on the remote control, and then select the "D.IN"
mode.
OPTICAL OUT
Optical Cable
(not supplied)

ENG - 12
Rear of the Soundbar

D.IN
Bottom of the Soundbar
DIGITAL AUDIO IN
(OPTICAL)
WIRELESS
DC 23V