Connecting The Soundbar To An Swa-W700 (Sold Separately) - Samsung HW-NW700 Mode D'emploi

08 CONNECTING THE SOUNDBAR TO AN
SWA-W700 (SOLD SEPARATELY)
1. Turn off the Soundbar using the Soundbar's remote control or by pressing the
main Soundbar.
2. Connect the wireless dongle to the "WIRELESS" port on the Soundbar main unit.
• When inserting the Wireless Dongle into the holder, make sure that the "WIRELESS" logo is
facing up, as shown in the pictures below.
Use the Holder-Dongle Screw (M3 x L10)
supplied with the HW-NW700.
• If you purchase and want to add an SWA-9000S (optional Wireless Rear Speaker Kit) to your
speaker setup after adding an SWA-W700, do not remove the Wireless dongle you have already
attached to the Soundbar's "WIRELESS" port.
• The wireless dongle that came with the SWA-W700 can be used with the optional Wireless Rear
Speaker Kit.
BYE
ENG - 26
button on the
WIRELESS