Maintenance - GreenWorks CS24B00 Manuel D'utilisation

Masquer les pouces Voir aussi pour CS24B00:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAITENANCE
CHANGING SANDING SHEETS AND PADS
Fig.7
To change sheets and pads, simply pull the used sheet off the base and attach the desired sheet by
pressing the sheet or pad onto the base of the sander.
W A R N I N G
When servicing, use only identical replacement parts. Use of any other parts could create a hazard or
cause product damage.
W A R N I N G
To avoid serious personal injury, always remove the battery pack from the product when cleaning or
performing any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to remove
dirt, dust, oil, grease, etc.
W A R N I N G
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come
in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which could result in
serious personal injury.
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
W A R N I N G
Upon removal, cover the battery pack's terminals with heavy-duty adhesive tape. Do not attempt to
destroy or disassemble battery pack or remove any of its components. Lithium-ion and nickel-cadmium
batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
13

Publicité

Table des Matières
loading

Table des Matières