Introduction; Important Safety Instructions - ProMariner DIGITAL ProMar1 Série Manuel Du Propriétaire Et Guide D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Introduction

1
Introduction
Thank you for purchasing our newest generation ProMar1 DS On-Board Marine Battery
Chargers with leading advancements in digital charging technology and waterproof
design/construction. Our all digital charging platform incorporates the latest in embedded
microprocessor and software control for precision 4-Stage Digital Charging of all 12 volt
flooded lead acid and Gel batteries.
Designed to extend battery life. The ProMar1 DS automatically analyzes battery connections,
charges, conditions and auto maintains each battery individually. When charging is completed,
each output will enter into an auto maintain (Energy Saver) mode, safe for long and short term
storage. ProMar1 DS will only turn on as needed to maintain fully charged batteries, lowering
AC consumption and reducing operating cost.
Additional Features Include:
All digital charging technology
Rugged plastic molded housing
Fully encapsulated and 100% waterproof to IP68
Fully automatic 4-stage digital charging
Dedicated battery charging, sensing and control per bank
Expanded LED status indicators
Wiring and battery fault detection
Auto-maintain energy saver mode
Shock resistant for all fresh and saltwater applications
Pre-wired for easy installation
For all 12 volt flooded lead acid and Gel batteries
Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection.
In-line DC safety fuses for maximum DC wire protection
3 year warranty

Important Safety Instructions

SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions for the ProMar1 DS
On-Board Marine Battery Charger Series.
CAUTION
- To reduce the risk of injury, charge only 12V Flooded lead acid
and Gel batteries. Other types of batteries may burst, causing personal injury.
EXTERNAL CONNECTIONS TO CHARGER SHALL COMPLY WITH THE UNITED STATES
COAST GUARD ELECTRICAL REGULATIONS (33CFR183, SUB PART 1).
Before connecting your batteries or applying AC power, read all instructions and cautionary
markings on the battery charger, cables, and batteries.
WARNING
To reduce the risk of injury to user or property, the user must read and understand the instruction
manual and all warnings on the charger and batteries before use.
WARNING
1. WARNING - RISK OF EXPLOSIVE GASES.
a. WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES
GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS
REASON, IT IS OF UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS
EACH TIME YOU USE THE CHARGER.
b. To reduce the risk of battery explosion, follow these instructions and those marked on the battery.
2. Use the charger for charging a LEAD-ACID battery only. It is not intended to supply power to an
extra-low-voltage electrical system or to charge dry-cell batteries. Charging dry-cell batteries
may burst and cause injury to persons and property.
3. Use of an attachment not recommended or sold by ProMariner may result in a risk of fire,
electric shock, or injury to persons.
4. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when
disconnecting the charger.
Safety Instructions
2

Publicité

Chapitres

Table des Matières
loading

Table des Matières