Unpacking; Requirements On The Installation Location - Graef CM 702 Mode D'emploi

separate remove control.
This unit is intended for use in households and similar use, such
•
as: Staff kitchens in shops and office; in agricultural estates; by
guests in hotels, motels and other living quarters; in bed and
breadfast boarding houses.
Always disconnect the connection cable by using plug; do not
•
pull the connecting cable.
The electric safety of the unit is ensured only when it is con-
•
nected to a socket with protective conductor. Operation on a
socket without protective conductor is forbidden. If in doubt,
let the house installation checked by a trained electrician.
The manufacturer shall not assume responsibility for damage
which has been caused by absent or interrupted protective con-
ductor.
Never touch the plug with moist hands.
•
Never carry the unit by its power cable.
•
The socket has to be easily accessible so that the power cable
•
can be removed easily in case of emergency.
Never transport the unit during operation.
•
In the absence of supervision and prior to assembly, during
•
cleaning disconnect the unit from the mains.
This unit is suitable for grinding coffee bean exclusively.
•
Packaging materials must not be used for playing. There is a
•
danger of suffocation.
Do not attempt to grind ground coffee again.
•

UNPACKING

Proceed as follows to unpack the unit:
Remove the unit from the box.
•
Remove the packaging parts.
•
Remove any stickers on the unit (do not remove the typeplate).
•

REQUIREMENTS ON THE INSTALLATION LOCATION

For safe and faultfree operation of the unit, the following requi-
rements of the installation location have to be met:
16