Connecting The Power Source To Input Supply; Operation - ESAB EMP 215ic Manuel D'instructions

5 OPERATION

4.3.2

Connecting the power source to input supply

Use one of the supplied adapters to connect the power source to mains.
5 OPERATION
General safety regulations for handling the equipment can be found in the "SAFETY
PRECAUTIONS" chapter of this manual. Read it through before you start using the
equipment!
NOTE!
When moving the equipment, use the intended handle. Never pull on the cables.
WARNING!
Rotating parts can cause injury, take great care.
WARNING!
Electric shock! Do not touch the workpiece or the welding head during operation!
0463 407 001 - 20 - © ESAB AB 2017