Care And Maintenance - Blueair Blue 3210 Manuel Utilisateur

Care and maintenance

General
•
Disconnect the air purifier from the power supply before maintenance.
•
Do not allow foreign objects to enter the air inlets or air outlets. This may cause electric
shock or damage the air purifier.
•
Never clean with gasoline, chemical solvents or corrosive materials as these agents may
damage the air purifier.
•
Make sure the air purifier is completely dry before connecting it to power.
•
Do not wash the main filter. The main filter is not washable or reusable.
Cleaning
•
Wash the pre-filter
filter with a soft brush attachment.
•
Wipe the exterior of the air purifier with a soft, clean, damp cloth.
•
Clean and check the power cable and power plug for wear or damages.
•
Clean the sensor when changing the main filter.
according to the instructions on the pre-filter´s label
15
or vacuum the pre-