Accessories; Lubrication - Kongskilde B 50/100 Instructions De Montage Et D'utilisation

figures are at 0. The counter is not
in order unless all of the figures
read 0 (an intense „click" is felt).
The key must not be turned anti-
clockwise before it is taken out as
the figures will be locked.
The weigher can also be provided
with a pulse switch for electronic
counter or other electrical control

(accessories).

Lubrication

The weigher has enclosed ball
bearings which do not require lubri-
fication. All other moving parts are
to be oiled with a thin oil. Remove
superfluous oil. To prevent rust, oil
the weigher carefully whenever it is
not required for a long period.
Cleaning
Clean the weigher with a brush or
compressed air. Be especially
aware that dust and dirt behind any
possible protection may impede the
accurate performance of the
weigher.
10
Accessories
1. Inlet piece. For connection of
OK160 pipes.
B 50: 132 023 179 (OK160)
B 100: 132 023 140 (OK200)
2. Inlet hopper.
B 50: 132 023 163
(500x500 mm)
B 100: 132 023 005
(670x670 mm)
3. Adjustable legs.
B 50: 132 022 051
B 100: 132 023 019
4. Outlet hopper. 300x300 mm
outlet.
B 50: 132 023 164
B 100: 132 023 002
5. Transition from 300x300 mm
square to OK160 (B 50) and
OK200 (B 100)
B 50: 132 023 180
B 100: 132 023 139
B 50
A 740
B 740
C 830
D 600
E 0-400
F 40
H 400
J 300
K 120
L 100
M OK160
N 500
O 325
6. Dust shield (not shown).
B 50: 132 023 178
B 100: 132 023 159
7. Pulse switch (not shown). For
electronic counter or other
electrical control.
B 50/B 100: 132 023 006
8. Electric counter (not shown). For
3 volt battery.
B 50/B 100: 132 023 172
B 100
900
900
1030
600
0-400
50
485
300
120
150
OK160
670
380