Settings And Viewing The Set Point; Locking And Unlocking The Touch Screen - Hayward Easy Temp ECP 06 Manuel D'instructions Et D'installation

4. USER INTERFACE (continued)
4.5 Settings and viewing the set point (Desired water
temperature)
In "OFF" and "ON" Mode
Press the buttons
to an accuracy of 0.5 °C.
It is recommended never to exceed 30°C to avoid deterioration of the
liners.
Note: Whetheron or off, all you need to do is press the
toview or change the set point.

4.6 Locking and unlocking the touch screen

Press the On/Off
inactive.
To unlock, press
The buttons become active again.
or to set the desired set point. Settings are made
button for 5 seconds until it beeps. The buttons become
for 5 seconds until it beeps.
or button
15