Technical Specifications; Frequently Asked Questions - Tiiwee A2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25

Technical specifications

Power: DC 5V / 3pcs * AAA Battery
Current: <300uA
Work Current:<100mA
Switch off Current:<40uA
Detection Distance:<8m
Alarm sound: 125dB
Detection Angle:110 degree
Working Humidity:<80%
Detection range profile:
IMPORTANT: The Infrared detector is sensitive to a human's vertical movement, and less sensitive to
horizontal movements, so it's best to aim the device at a 90 degrees' angle to a person's walking direction.
The PIR motion sensor alarm detects signals at a distance up to 8 meters.

Frequently asked questions

Q
: The PIR motion sensor alarm is switched on but does not detect any motion
A: Maybe the system is not armed yet. Short press the On/Off button [
] to arm the device
(The device remembers its last setting. If it was disarmed when switched Off, it will be in disarmed mode when
it is switched On again. Pressing the On/Off button [
] briefly will arm the device again)
Q: The PIR does not enter pairing mode when pressing the Pairing or Mode button
.
A: The device might be switched off. Try long pressing the On/Off button [
] to switch the unit on. Now,
enter Pairing mode by long pressing the Pairing or Mode button
.
Q: The device does not switch on
A: Check the batteries. They might be empty
Q: The device signals motion when there is no motion ('false alarms")
A1: The PIR motion sensor alarm is activated by infrared light and can also be triggered by direct sunlight. It is
advised to keep the device out of direct sunlight.
A2: Animals like dogs, birds and cats are known to trigger PIR motion sensors as well.
Q: The remote-control indicator light is on when I press a button but the PIR motion detector does not react to
it.
A1: The signal might not penetrate walls or cover large distances
A2: Try opening the remote control and taking the battery out- and back in again.
A3: The battery is running out of power. Insert a new battery.
Q: I have connected a Door & Window sensor, and I cannot change the alarm sound from siren to chime

Publicité

Table des Matières
loading

Table des Matières