Tiiwee TWWS02 Mode D'emploi

ENGLISH
Tiiwee Door & Window Sensor (For indoor use only)
For Tiiwee Home Alarm System
Introduction
Congratulations with your Tiiwee Door & Window sensor. It is intended to be used in combination with
the components of the Tiiwee Home Alarm System and can be wirelessly connected to the Tiiwee A1
Alarm Unit or the Tiiwee A2 PIR Motion Sensor Alarm (available separately).
Box contents
1 x Door & Window sensor for Tiiwee Home Alarm System
1 x battery, 23A, 12V alkaline
2 x screws
1 x set of double sided mounting tape
1 x instructions for use
Product Overview and Operation
The Door & window sensor consists of a magnet and a sensor which contains a detector for changes in
magnetic fields ('flux'). When the magnet is moved away from the sensor, the detector will detect that
motion and will send a wireless signal to the Tiiwee A1- or A2 Alarm unit. The Tiiwee Alarm unit will
now emit a strong alarm sound or a Chime depending on the settings of the Alarm unit.
Connecting the door & window sensor to an Alarm siren
This door & window sensor is compatible with the Tiiwee Home Alarm System. Connect it wirelessly
with the Tiiwee A1 Alarm Unit or the Tiiwee A2 PIR Sensor Alarm.
The instructions for pairing the Door & Window sensor with the Tiiwee Home Alarm System are
included with the Tiiwee A1 Alarm unit and the Tiiwee A2 PIR Alarm sensor or can be downloaded
on our website www.tiiwee.com .
1
Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.