Connecting To A 3G Network - Arnova 7c G2 Manuel D'utilisation

CONNECTING TO A 3G NETWORK

Your Arnova 7c G2 is equipped with a SIM card slot. Any standard SIM card can be inserted. There is no provider restriction.
Note that the Arnova 7c G2 will only have signal if you are in an area covered by your 3G provider's 3G or EDGE network.
Inserting your SIM card
IMPORTANT: Before inserting a SIM card, you must turn off the device.
1 Switch off the device.
Insert the SIM card in the SIM card slot.
2
Make sure to have the chip side up when you insert it.
Chip
Turn on the device.
3
A Pin number may be requested. Enter the SIM card pin number.
4
Your device will attempt to connect to the 3G network of your provider.
NOTE: If your device does not connect to
your 3G provider's network:
1. Contact your 3G provider to obtain the
connection parameters.
2. On your device, tap the Menu icon, then
settings.
3. Select Wireless & networks > Mobile
networks.
-In Network operators, select your operator.
-In Access Point Names, select the correct
access point name and enter the exact con-
nection parameters.
5