Power Button - Noco BOOST HD GB70 Mode D'emploi

1.) Internal Battery Level
Indicates the charge level of the internal battery.
2.) Error LED
Illuminates Red if reverse polarity is detected, or blinks "On" and "Off" when the internal battery
temperature is too high.

3.) Power Button

Push to turn unit "On" & "Off".
4.) Power LED
Illuminates White when unit is "On".
5.) Light Mode Button
Toggles the ultra-bright LED light through 7 light modes: 100% > 50% > 10% > SOS >
Blink > Strobe > Off
6.) Boost LED
Illuminates White when Boost is active. If the unit is connected properly to a battery, the GB70 will
automatically detect a battery and go into Boost mode (LED flashes White when Manual Overide feature is active).
7.) Manual Override Button WARNING: Disables safety
To enable, push and hold for three (3) seconds.
protection and manually forces Boost "On". Only for use when a battery is too low to be
detected.