Cleaning And Maintenance; Cleaning The Appliance - Hotpoint Ariston SL D10 BAW Mode D'emploi

it en
Trolley System (D)
The Trolley System allows you to move your vacuum
cleaner easily when cleaning and carry it from room
to room effortlessly.
1. Press the opening/closing button on the Trolley
System (13) to pull out the carry handle (12) until
it locks into place at the desired length.
2. Having completed your cleaning, press the
opening/closing button on the Trolley System
and close the carrying handle until it locks into
place.
Use the Trolley System's carrying handle to
store the appliance, making sure you have
correctly locked it into place.
Start & Pause (E)
The Start & Pause function (if available) allows you
to keep the vacuum cleaner on stand-by and lock
the cleaning head in the park position: just insert the
brush into its horizontal housing (30).
Dual System (F)
The Trolley Dual Clean (if available) version of the
Trolley Power makes your use of the appliance
extremely versatile because it can be used with or
without dust bag. Just assemble the conversion kit
in the package: it comprises a Pure Clean dust bag
(36), dust bag support (35), gasket (39), and motor
filter grill (38) already fitted to the motor filter (37). The
assembling takes place as follows:
1. Make sure the appliance is disconnected from
the electrical outlet.
2. Press the dust-compartment opening button
(14) to open the dust compartment lid (15) and
remove the dust container (41).
3. Fit the gasket into the special groove along the
perimeter of the dust compartment (40).
4. Fit the motor filter grill (already fitted to the motor
filter) into the special dust-compartment guides.
5. Slide the Pure Clean dust bag into the dust bag
support all the way; then place it into the special
dust compartment.
6. Close the dust compartment lid until it clicks into
place.
To use the vacuum cleaner with the dust
container, remember to remove all the
following parts: Pure Clean dust bag, dust bag
support, gasket, motor filter and motor filter grill.
Air Fresh Hepa 13 (I)
The Air Fresh Hepa 13 filter (32) (if available), with
active carbons treatment, ensures the maximal dust
retention (>99,95%) and the filtration of odours.
18
CLEANING AND
MAINTENANCE
Before cleaning or maintaining the vacuum
cleaner, make sure it has been unplugged
from the electrical outlet. Do not use aggressive
substances or abrasive materials to clean the
appliance, its internal parts and attachments.
Make sure it is thoroughly dry before using again.
Make sure all its parts are thoroughly dry
before replacing them.
We advise you to clean the filter at least
every 4 months to restore its filtering power.
In any case we recommend replacing the filter at
least every year to ensure maximum performance.

Cleaning the appliance

Use a dry or slightly damp soft cloth to clean the
plastic parts (body, dust compartment, flexible hose
etc) and the metal extension pipe (9).
Cleaning the dust compartment (G)
For the routine cleaning of the dust compartment (40):
1. Press the dust-compartment opening button (14)
to open the dust compartment lid (15).
2. Based on the model, remove the Pure Clean
dust bag (36) or the dust container (41).
3. Clean the dust compartment by removing any
residual dirt with a small brush. If needed, use a
damp soft cloth, taking care to wipe all its parts
entirely dry.
4. Re-place the Pure Clean dust bag or dust
container correctly and close the dust
compartment lid until it clicks into place.
Replacing the Pure Clean dust bag (H)
We recommend
original Pure Clean dust bags (on selected
models only), because their special fabric
allows optimum air filtration, maximum dust/
powder retention, high performances and a
long motor life.
As the Pure Clean dust bags (36) are made of fabric,
they are more resistant than conventional paper bags
and can retain very fine dust/powder particles more
effectively, thus ensuring maximum hygiene.
We recommend replacing the Pure Clean
bag as soon as the full-bag indicator
illuminates. Change at least once a year to be
always sure of the hygienic condition of your
vacuum cleaner. The pores of a bag clogged with
dust/powder particles reduce the motor's suction
always using Hotpoint