General Safety Instructions - Siemens TN10 Série Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
EN • Operating instructions
Thank you for buying the TN10 active ironing
board from Siemens.
Carefully read through the operating instructions
for the appliance before using, and safeguard
them for future reference.
You can download this manual from the local
homepages of Siemens.

General safety instructions

❐ This appliance is not intended to be used by persons (including children)
with reduced physical, sensory or mental capacities, or lack of experience
and knowledge, unless they have been given supervision or instruction.
❐ Children should be supervised to ensure that they do not play with the
appliance.
When using your steam station or iron for the first time, it is essential to read the
instructions for use which came with your steam station and iron.
❐ The iron must not be left unattended while it is connected to the supply
mains.
❐ Remove the plug from the socket before filling the appliance with water or
before pouring out the remaining water after use.
❐ The appliance must be used and placed on a stable surface.
❐ When placed on its stand, make sure that the surface on which the stand
is placed is stable.
❐ The iron should not be used if it has been dropped, if there are visible
signs of damage or if it is leaking water.It must be checked by an
authorized Technical Service Centre before it can be used again.
❐ With the aim of avoiding dangerous situations, any work or repair that the
appliance may need, e.g. replacing a faulty mains cable, must only be
carried out by qualified personnel from an Authorised Technical Service
Centre.
CAUTION. Hot surface.
Surface is liable to get hot during use.
10
S I E ME NS
Open the leaflet sides

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tn10100/01Tn10100

Table des Matières