First Use; Maintenance And Care; Technical Data - Alber PS4820 Mode D'emploi

FIRST USE

1. Plug the mains plug into the mains outlet. Both status indicators on
the charger illuminate orange.
2. Connect the charger with the two drive wheels. The magnetic con-
tact of the two charge plugs ensures an 'automatic' connection with
the charge sockets of the e-motion drive wheels. Both status indica-
tors on the charger flash green.
3. Observe the charge status indication on the charger and on the
e-motion drive wheel. The drive wheel shall not be moved during the
charge process.
4. Unplug the mains plug from the mains outlet once both charge status
indicators on the charger indicate "full" with a constant green illumina-
tion. In urgent cases the charge process can be interrupted at any time.
5. Disconnect the charge cable from the rechargeable battery pack.

MAINTENANCE AND CARE

The charger is maintenance-free. If necessary, clean the device only
with a damp cloth. Do not use aggressive cleaning agents. It is not
permitted for any liquid to enter the interior of the charger. Protect the
mains plug and charge connectors from contamination.
GUARANTEE
We provide a two-year warranty for the product from the date of purchase.

TECHNICAL DATA

Model:
Rated Input Voltage:
Input Current:
Rated Output Voltage:
Rated Output Current:
Rated Output Power:
Protection Type:
Protection Class:
Operating Temperature: 0 ... 45°C
Humidity:
PS4820
100 ... 240VAC, 50Hz ... 60Hz
Max. 2,5A
2 x 48VDC
2 x 1,0A
96 W
IP 31
II
Storage 5% ... 95%
Operation 10% ... 80%
EN