Maintenance; General Information; Guarantee - Bien-Air Dental PLMP 021 FO Mode D'emploi

Electrovalve kit fig. 5
This kit avoid heating up the micro-
motor at low speed in pneumatical
mode. The solenoid valve is manda-
tory for intensive work at low speed.
Installations in pneumatical
mode fig. 7
Connect tubings and couplings to
the electrovalve.
The direction of air flow is shown on
the solenoid valve block fig. 7(C).
To adjust the flow of air through the
valve fig. 7(D), check the airflow on
the motor using the flowmeter fitted
to the mounting with values indicat-
ed on the motor used for this pur-
pose.
Cooling motor fig. 7(E).
Min. 3.5 - max. 6 bar fig. 7(F).

Maintenance

Overhaul
Never disassemble the device. For
any modification and repair, we
recommend that you contact your
regular supplier or Bien-Air Dental
directly. Bien-Air Dental asks the
user to have its dynamic instruments
checked or inspected at least once a
year.
Information
The technical specifications, illustra-
tions and dimensions contained in
these instructions are given only as a
guide. They may not be the subject of
any claim. The manufacturer re-
serves the right to make technical
improvements to its equipment,
without amending these instruc-
tions. For all additional information,
please contact Bien-Air Dental SA at
the address indicated on the back
cover.

General information

The device must be used by a quali-
fied person in accordance with the
current legal provisions concerning
industrial safety, health and accident
prevention measures, and these
working instructions. In accordance
with these requirements, the opera-
tors:
• must only use operating devices
that are in perfect working order;
in the event of irregular function-
ing, excessive vibration, abnor-
mal heating or other signs indi-
cating malfunction of the device,
the work must be stopped imme-
diately; in this case, contact a
repair centre that is approved by
Bien-Air Dental;
• must ensure that the device is
used only for the purpose for
which it is intended, must protect
themselves, their patients and
third parties from any danger,
and must avoid contamination
through the use of the product.
The device is intended for medical
treatment only; any use other than
that for which this product is intend-
ed is unauthorised and may be dan-
gerous. The medical device meets all
the current legal requirements.
The device is not authorised for use
in an explosive atmosphere (anaes-
thetic gas).
Avoid any contact with liquids.
Only use maintenance products and
components from Bien-Air Dental.
The use of other products and com-
ponents can void the guarantee.
This device must to be recycled.
Electrical and electronic equip-
ment may contain dangerous sub-
stances which constitute health and
environmental hazards. The user
must return the device to its dealer or
establish direct contact with an ap-
proved body for treatment and recov-
ery of this type of equipment (Euro-
pean Directive 2002/96/EC).

Guarantee

Terms of guarantee
Bien-Air Dental grants the operator a
guarantee covering all functional
defects, material or production
faults. The device is covered by this
guarantee for 12 months from the
date of invoicing.
Bien-Air Dental offers a 24-month
guarantee for the glass-bar light
conductors.
In the event of justified claim,
Bien-Air Dental or its authorised rep-
resentative will fulfil the company's
14