Samsung 7 Série Mode D'emploi page 47

Masquer les pouces Voir aussi pour 7 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting for Anynet+
¦
Problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting to
Anynet+ device..." appears on the
screen.
The Anynet+ device does not play.
The connected device is not
displayed.
The TV Programme cannot be
recorded.
The TV sound is not output
through the receiver.
Possible Solution
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Only one receiver (home theatre) can be connected.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device's Video/Audio/HDMI cable connections.
Check whether
Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ doesn't work in certain situations. (Searching channels, operating
setup), etc.)
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
Check if the Anynet+ Function of Anynet+ device is set on.
Check if the Anynet+ device is properly connected to the TV and check if the
On in the Anynet+ Setup menu.
Press the
TOOLS
button to display the Anynet+ menu and select a menu you want.
Select
View TV in the Anynet+ menu.
Press the
SOURCE
button on the TV remote control and select a non- Anynet+ device.
Press
P
>/<, and
PRE-CH
tuner-embedded Anynet+ device is not connected.)
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is complete.
You cannot use the play function when
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether
Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+
functions.
If connection is terminated because there has been a power interruption or the HDMI cable has been
disconnected, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
Connect the optical cable between TV and the receiver.
The ARC function enables digital output of sound using the
when the TV is connected to an audio receiver that supports the ARC function.
to change the TV mode. (Note that the channel button operates only when a
Plug & Play (initial setup) is in progress.
HDMI IN 2(ARC)
Media Play or Plug & Play (initial
Anynet+ (HDMI-CEC) is set to
port and can only be operated
47
English

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Le40c750Le46c750

Table des Matières