Samsung 7 Série Mode D'emploi page 19

suggested for other items, such as keyboards and
computer monitors, that you may tend to fixate or
concentrate on. If your eyes show signs of fatigue or
dryness or if you have any of the above symptoms,
immediately discontinue use of this device and do
not resume using it for at least thirty minutes after
the symptoms have subsided.
x
The ideal viewing distance should be three times
or more the height of the screen. We recommend
sitting with viewer's eyes on a level with the screen.
3D
This exciting new feature enables you to
view 3D content. In order to fully enjoy
this feature, you must purchase a pair
of Samsung 3D Active Glasses (SSG-
2100AB, SSG-2200AR, SSG- 2200KR) to
view 3D video.
Samsung 3D Active Glasses are sold
separately. For more detailed purchasing information, contact
the retailer where you purchased this TV.
3D emitter
✎
If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be
obtained.
3D Mode : Select the 3D input format.
■
✎
If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select 3D
mode from the list as below.
3D Mode Operation
Off Turns the 3D function off.
2D → 3D
Changes a 2D image to 3D.
Displays two images next to
Side by Side
each other.
Displays one image above
Top & Bottom
another.
Displays the images for the left
Line by Line
and right eye alternately in rows.
Displays the images for the
Vertical Stripe left and right eye alternately in
columns.
Displays the images for the
Checker
left and right eye alternately in
Board
pixels.
Displays the images for the
Frequency left and right eye alternately in
frames.
✎
" Side by Side" and "Top & Bottom" are available
when the resolution is 720p, 1080i and 1080p in
(DTV, HDMI and USB modes) or set to PC (HDMI
mode).
✎
"Vertical Strip", "Line by Line" and "Checker
Board" are available when the resolution is set to
PC (HDMI mode).
✎
"Frequency" displays the frequency (60Hz only)
when the resolution is set to PC.
→ 2D (Off / On): Displays the image for the left eye only.
3D
■
✎
This function is deactivated when
to "2D → 3D" or Off.
3D View point: The overall adjustment of 3D perspective.
■
✎
This function is deactivated when
to "2D → 3D" or Off.
: Adjusts focus / depth in "2D → 3D" mode.
Depth
■
✎
This function is only activated when the
is "2D → 3D".
Picture Correction : Adjusts the images for the left and
■
right eye.
3D Auto View (Off / On)
■
a "Side-By-Side" format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the HDMI 1.3
transmitter.
✎
If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a
3D Mode using the
menu.
✎
Support resolution (16:9 only)
Resolution
1280 x 720p
1920 x 1080i
1920 x 1080p
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x
1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
3D Mode is set
3D Mode is set
3D Mode
: If 3D Auto View is set to On,
3D button or corresponding
Frequency (Hz)
50 / 60 Hz
50 / 60 Hz
24 / 30 / 50 / 60 Hz
19
English