Hama MyVoice 640 Mode D'emploi page 7

• Select MyVoice 640 and wait until the headset is listed as
connected in the Bluetooth
Note – Bluetooth
If your terminal device requests a password to establish the
connection, enter 0000.
Note
If pairing was successful, the status LED (3) flashes blue slowly.
A voice says, 'Connected'.
• You can now use the headset.
5.2. Automatic Bluetooth
(after successful pairing)
Note
• Make sure that your Bluetooth
and Bluetooth
• For more information, please refer to the operating instructions
of your terminal device.
• Make sure that the headset is switched on.
• After the headset and terminal device have been paired, a
connection is established automatically.
• You can now use the headset.
Note
• If pairing was successful, the status LED (3) flashes blue
slowly. A voice says, 'Connected'.
• It may be necessary to change the settings on your terminal
device to enable it to automatically connect to the paired
headset.
6
settings on your terminal device.
®
password
®
connection
®
is activated.
®
-capable terminal device is on
®