Black & Decker TO3290XSD Guide D'utilisation Et D'entretien page 9

OP E R AT I NG YOUR OVE N
Broil Function |
No preheat needed for this function.
1. Press the broil function button (
2. The oven will either default to factory function settings or to the last setting
used. (see Function Chart on page 11)
3. If needed, press the temperature buttons (
temperature.
4. If needed, press the time buttons (
for a longer time period, and Down for a shorter time period.
5. Press the Start/Stop button (I/0) to begin broiling.
6. Place the food in the oven on the top rack position.
Be sure food or baking dish does not come within 1 1/2 inches (3.81cm) of the
top heating elements.
Note: Place food directly on rack with baking pan in place.
7. There will be an audible beep once the broil cycle
is complete and the oven will stop heating.
8. Unplug the appliance when not in use.
Toast Function |
No preheat needed for this function.
1. Press the Toast function button (
2. The oven will either default to factory function settings or to the last setting
used. (see Function Chart on page 11)
3. If needed, press the time/toast shade buttons (
shade. Up arrow for a darker shade, and Down for a lighter shade.
Note: Shades 1-7 are available, 1 being the lightest and 7 being the darkest.
4. Place food directly on rack in the middle rack position and then press the
Start/Stop button (I/0) to begin toasting.
5. There will be an audible beep once the toasting cycle is complete and the oven
will stop heating.
6. Unplug the appliance when not in use.
). The blue light will illuminate.
) to select the desired
) to select the desired time. Up arrow
). The blue light will illuminate.
9
) to select the desired