Motor Overload Protection; Grounding Instructions - hilmor 1950532 Instructions Pour L'installation Et L'entretien

ENGLISH
ACCESSORIES SAFETY WARNINGS
WARNING:
tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, use only hilmor® recommended accessories such as:
carrying strap, hoses, wireless vacuum gauge, and valve core removal tool should
WARNING: This machine should only be used for evacuation of refrigerant systems
after refrigerant has been removed from the system. This machine is not to be used

MOTOR OVERLOAD PROTECTION

The intelligent motor controller prevents motor overload condition. In the case of extreme
over voltage or under voltage the machine will not start. Find working power source.
MOTOR THERMAL PROTECTION
The motor and controller have thermal protection. If the motor overheats for any reason the
before attempting to restart

GROUNDING INSTRUCTIONS

• The hilmor® Vacuum Pump must be grounded. In
the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an
escape wire for the electric current. The machine
is equipped with a cord that has a grounding wire
with a grounding plug. The plug must be plugged
into an outlet that is properly installed and
grounded in accordance with local codes
WARNING: Improper installation of the grounding plug may result in the
risk of electrical shock. When repair or replacement of the cord or plug is
required, do not connect the grounding wire to either flat blade terminal.
The wire with insulation and an outer surface that is green, with or without
• Check with a qualified electrician or serviceman when the grounding instructions are
not completely understood, or when in doubt as to whether the product is properly
grounded. Do not modify the provided plug; if it does not fit the outlet, have the proper
outlet installed by a qualified electrician.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
8 8
GROUNDED
OUTLET
GROUNDING PIN