Villaware BLVLLAZ05H Mode D'emploi page 7

operating instructions
1. Prepare ingredients.
2. Remove lid and place ingredients in the jar.
3. Your blender includes a feeder cap that allows you to add ingredients
while blending (see Figure 9).
4. With the dial in the off position "O" plug the power cord into the
electrical outlet.
5. The variable speed dial lets you fully control the blending process
(Figure 10). It seamlessly moves from low to high speeds so you
can select the perfect power for you blending needs, from delicate
chopping to finely shaved ice.
6. Turn the speed dial clockwise to increase power and speed or
counter clockwise to reduce them.
7. To pulse, keep the dial in the off position "O" and press the pulse
button " " in the centre of the speed dial (Figure 11). Hold for 1-3
seconds and release.
IMPORTANT: DO NOT OPERATE BLENDER CONTINuOuSLY FOR MORE
THAN 5 MINuTES.
RESET FUNCTION
1. The motor contains a resettable fuse to protect against overheating.
2. If the unit stops after continuous use, turn the blender off "O" and unplug it
from the electrical outlet.
3. Wait 5-10 minutes for the blender to cool down.
4. Plug the blender into the electrical outlet and resume normal use.
5. If the blender does not operate after instructions 1-4, repeat the above steps and wait a
further 10 minutes before using again.
6
Figure 9
Figure 10
Figure 11