Hahnel CAPTUR Module - Pro Mode D'emploi page 10

Sensor adjustable settings
There are several parameters which can be adjusted for each sensor of the
Captur Module – Pro. Use
one sensor to select the sensor and to select which parameters need to
be adjusted. (e.g. move to
Toggle Button
parameters.
parameters (e.g. adjust icon
Press SET button
Parameter
13
14
15
16
Beeper and Lock settings
Lock
• Press
when camera is triggered by any program
• Press and hold
Release Button
Warning
• Do not modify product
• Keep Captur Module – Pro and Captur Module – IR, dry at all times
• Do not use in the presence of flammable gas
• Keep out of the reach of children
• Do not expose to excessive temperatures or strong direct sunlight
• Do not leave the unit in the trunk or on the dashboard of a vehicle.
• Overheating can result in leaking, fire or explosion
• Observe correct battery polarity
• Dispose in accordance with appropriate environmental regulations
• Take battery out of unit if stored for an extended period of time
Scan QR code for more information on the Captur Module Pro
8
Toggle Button
13
27
again to confirm adjustment.
Description
Sensitivity adjustment
Delay before shooting starts
Duration of burst/exposure
with continuous/bulb mode
in camera
Number of times sensor is
allowed to trigger the Module
- Pro
to turn ON and OFF the beeper
Lock
to or
will always remain active
28
17
). Press SET button
28
+ or - is used to adjust the value of the
to 80 for more sensitive sound triggering).
Setting
Min 01 – 99 max
0s to max 10s in 1/100th
second increments
0s to max 05" sec (in 1 sec
increments)
00 – 99
-t- = (starts time lapse)
--- = (unlimited)
the Captur Module – Pro buttons. The
< or > to move from
27
to adjusted
1
. Beeper will "beep"
Captur Module - Pro