Connecting An External Device; Connecting Using An Hdmi Cable (Capable Of Dolby Atmos Decoding And Playback); Connecting Using An Hdmi Cable - Samsung harman/kardon HW-Q90R Manuel D'utilisation

05 CONNECTING AN EXTERNAL DEVICE

Connect to an external device via a wired or wireless network to play the external device's sound
through the Soundbar.
Connecting using an HDMI Cable (Capable of Dolby Atmos decoding
and playback)
• When you use Dolby Atmos®: If the input source is Dolby Atmos®, 7.1.4 channels are outputted.
When Dolby Atmos® is active, the Soundbar's sound effect modes controlled by the SOUND MODE
button are not available.
• Important: This product supports Dolby Atmos® only in HDMI mode.
External Device
1. Connect an HDMI cable from the HDMI IN 1 or HDMI IN 2 jack on the bottom of the Soundbar to the
HDMI OUT jack on your digital device.
2. Connect an HDMI cable from the HDMI OUT (TV-ARC) jack on the bottom of the Soundbar to the
HDMI IN jack on your TV.
3. Press the (Source) button on the top panel or on the remote control, and then select
"HDMI 1" or "HDMI 2".
4. "HDMI 1" or "HDMI 2" mode is displayed on the Soundbar display panel and sound plays.
HDMI Cable
HDMI OUT
HDMI IN
(ARC)
ENG - 15
Top of the Soundbar

OR

HDMI Cable
HDMI 1
OR
HDMI 2
HDMI IN 1
HDMI IN 2
HDMI OUT
(TV-ARC)
Bottom of the Soundbar