Références; Tables - FLIR E Série Manuel De L'utilisateur

Masquer les pouces Voir aussi pour E Série:
Table des Matières

Publicité

18
Tables des émissivités
Cette section rassemble les données d'émissivité issues des publications relatives à l'in-
frarouge et des mesures issues des systèmes FLIR Systems.
18.1 Références
1. Mikaél A. Bramson : Infrared Radiation, A Handbook for Applications. Plenum press,
N.Y.
2. William L. Wolfe, George J. Zissis : The Infrared Handbook, Office of Naval Re-
search, Department of Navy. Washington, D.C.
3. Madding, R. P. : Thermographic Instruments and systems. Madison, Wisconsin : Uni-
versity of Wisconsin - Extension, Department of Engineering and Applied Science.
4. William L. Wolfe : Handbook of Military Infrared Technology, Office of Naval Re-
search, Department of Navy. Washington, D.C.
5. Jones, Smith, Probert : External thermography of buildings..., Proc. of the Society of
Photo-Optical Instrumentation Engineers, vol. 110, Industrial and Civil Applications of
Infrared Technology. London, June 1977.
6. Paljak, Pettersson : Thermography of Buildings. Swedish Building Research Institute.
Stockholm, 1972.
7. Vlcek, J : Determination of emissivity with imaging radiometers and some emissivities
at λ = 5 µm. Photogrammetric Engineering and Remote Sensing.
8. Kern : Evaluation of infrared emission of clouds and ground as measured by weather
satellites. Defence Documentation Center, AD 617 417.
9. Öhman, Claes : Emittansmätningar med AGEMA E-Box. Teknisk rapport, AGEMA
1999. (Emittance measurements using AGEMA E-Box. Technical report, AGEMA
1999.)
10. Matteï, S., Tang-Kwor, E : Emissivity measurements for Nextel Velvet coating 811-21
between –36°C AND 82°C.
11. Lohrengel & Todtenhaupt (1996)
12. ITC Technical publication 32.
13. ITC Technical publication 29.
REMARQUE
Les valeurs d'émissivité du tableau ci-dessous sont enregistrées à l'aide d'une caméra ondes courtes
(SW). Ces valeurs ne sont que des recommandations et sont à utiliser avec précaution.

18.2 Tables

Table 18.1 T : Spectre total ; SW: 2–5 µm (onde courte) ; LW : 8–14 µm (onde longue) ; LLW : 6,5–20 µm
(onde très longue) ; 1 : Matériau ; 2 : Spécification ; 3 : Température en °C ; 4 : Spectre ; 5 : Émissivité ; 6 :
Référence
1
2
3M type 35
Ruban adhésif
isolant vinyle (plu-
sieurs couleurs)
3M type 88
Ruban adhésif
isolant vinyle noir
3M type 88
Ruban adhésif
isolant vinyle noir
3M type Super 33
Ruban adhésif
+
isolant vinyle noir
Acier inoxydable
alliage, 8 % Ni,
18 % Cr
Acier inoxydable
feuille non traitée,
légèrement
grattée
Acier inoxydable
feuille non traitée,
légèrement
grattée
Acier inoxydable
feuille, polie
#T559828; r. AC/ 9769/9769; fr-FR
3
4
5
< 80
LW
Environ 0,96
< 105
LW
Environ 0,96
< 105
MW
< 0,96
< 80
LW
Environ 0,96
500
T
0,35
70
0,30
SW
70
LW
0,28
70
SW
0,18
6
13
13
13
13
1
9
9
9
53

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

E4

Table des Matières