Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

[MANUAL]

Press the [MODE] button, and select
the flash mode. (P17)
The optimum camera to subject
distance and guide number (GN)
matching the digital camera
settings are shown on the display
panel.
A
A: Optimum camera to subject
distance
1 Turn the select dial and set
the guide number (GN) so
that the optimum camera
to subject distance is set
to the distance to the
subject.
If the optimum camera to subject
distance is closer than 0.6 m (or
0.5 m for close-up photos), the
lighting range of the flash will shift.
In this case, the user is warned by
the flashing of the optimum
camera to subject distance on the
display.
The optimum camera to subject
distance changes depending on
the digital camera settings (ISO
sensitivity, aperture, focal length
and shutter speed).
2 Press the shutter button
all the way down, and take
the photo.
If the ISO sensitivity is [100], the
optimum camera to subject
distance can be calculated by
dividing the guide number (GN) by
the aperture. (P41)
The optimum camera to subject
distance is an estimate.
21
VQT1B11

Publicité

Table des Matières
loading

Table des Matières