LEXIBOOK Move Cam DJA400 Série Mode D'emploi page 28

CONNECTING THE CAMCORDER TO A TV
You can play your files on TV by connecting an AV cable (not included).
1. Connect the camcorder to the TV using an AV cable (not included)
2. Turn on the TV and set it "AV" mode.
Note: Take care to properly match the colour.
3. Switch on the camcorder.
4. Set the camcorder to "record mode" (i.e. Camera or Video mode) to
preview the subject that you want to record on the TV screen.
5. Set the camcorder to Playback mode to review your pictures and
videos.
Notes:
• Use the supplied AV cable (not included) to connect your camcorder
to the TV.
• For a better image quality, set the TV system to PAL or NTSC ("TV
Mode" in the "Setup" menu).
• If the image does not display in the center of the TV screen, adjust
the TV settings (refer to the TV instruction manual).
• The batteries are also used when the camcorder is connected to
the TV.
CONNECTING YOUR CAMCORDER TO A PC
1. There are two ways to connect the content of your camcorder to
your computer:
a. Connect the USB cable supplied to the PC and the camcorder.
b. Remove the camcorder's micro SD card and put it into a card reader
and insert the card reader into your computer.
2. "Mass storage" will appear on the camcorder's screen.
3. Now open either Quick Time Player (you may have to download
this software from the internet if you do not already have it) or your
computer's photo software and you can import your pictures or videos
and edit as you normally would using this software.
4. Open "My Computer" or "Windows Explorer" on your computer.
5. A "Removable Disk" will appear. Double click on it to view the
contents.
6. Double click on the "DCIM" folder to view your photos and videos.
7. Now you can copy and save your photos and video files to your
computer.
28
A400series IM1125_20Mar_V05.indb 28 3/20/15 12:55 P