LEXIBOOK Move Cam DJA400 Série Mode D'emploi page 22

SETTINGS MENU (Video mode 2)
Turn the camcorder on and press MODE button to set the device to
video mode 2. The video icon is displayed at the top left corner of
the LCD screen. Press MENU button to enter "Video" menu.
"Video" menu
1. Video Resolution
Changes recording resolution. Select a small size resolution for longer
recording time. There are two options: (HD) 1280 x 720 / (VGA) 640 x 480
2. Loop Recording Time
Set a time limit for a video recording and when the time is up, it will
start another video. Press the shutter to stop the recording. The
settings are: 3min / 5min / 10min / OFF.
3. Rotate
Use this function if you have a car mount (not included). Press the
shutter to select: On / Off.
Note: when you select "Off", the image is turned upside down for
easier viewing.
4. Motion Detection
When this function is activated, the camcorder starts recording
automatically when it detects motion. The recording automatically
stops when no motion is detected for more than 10 seconds.
"Date" menu
For more information about the "Date" menu, please refer to the "Date"
menu section.
"Setup" menu
For more information about the "Setup" menu, please consult the
"Setup" menu section.
22
A400series IM1125_20Mar_V05.indb 22 3/20/15 12:55 P