Controls And Indicators - Candy GrandO GO DC 68G Manuel D'utilisation

40005612Eng.qxd 07/07/2008

Controls and indicators

PROGRAMME
SELECTOR
Control panel and indicator lights
Programme Selector – Select the required programme
'Marche Arrêt' button and indicator – Press to switch on, the indicator will light
'Départ' – Press Départ to commence the selected drying programme. Press for 5 seconds
to cancel/reset the programme
'Séchage Délicat' button – Press to reduce the heat level for delicate items, the indicator
above the button will light up. To change the heat setting the programme must be reset
Low Heat – Indicator light ON
'Réservoir Plein' indicator – Lights when the water container is full
'Entretien Filtre' indicator – Lights when the filter needs cleaning
'Départ Différé' button – Allows the user to delay the start of the drying cycle (see
details of operation page 17)
Display
START – When the dryer is switched On the START indicator will flash, when the
programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion of the
programme
15' - Indicator lights when there is less than 15 minutes left until completion of the
programme. At this stage of the drying cycle the machine enters the Cool Down phase
STOP - Indicator lights when the programme is finished
6h - 6 hour start delay (light flashes when in operation)
9h - 9 hour start delay (light flashes when in operation)
16:22 Page 11
EMPTY WATER
INDICATOR
(Réservoir Plein)
ACRYLICS/
SYNTHETICS BUTTON
BUTTON (Départ)
(Séchage
Délicat)
High Heat – Indicator light OFF
COUNTDOWN FILTER CARE
DISPLAY INDICATOR
(Entretien Filtre)
START START DELAY
BUTTON
(Départ
Différé)
ON/OFF
BUTTON
(Marche
Arrêt)
11