patura 144250 Mode D'emploi page 29

5. Secure by bolting into place the four bolts
(supplied with the solar panel kit).
For each bolt:
• Hold a washer and nut behind the hole on the panel.
• Secure the arrangement by tightening a washer and bolt into place through the panel
bracket hole.
40 W solar panel and panel bracket
On the back of the
solar panel, position
the regulator/cables
as shown.
65 W solar panel and panel bracket
On the back of the
solar panel,
position the
regulator/cables at
the top of the panel,
hidden by the panel
bracket, as shown.
29