Installation Precautions - Pioneer KRL-46V Mode D'emploi

preparation

installation precautions

Observe the following precautions when installing with
any items such as the optional stand.
When using other stands, brackets or equivalent
items
• Consult your dealer.
• The following mounting holes can be used for the
installation.
rear view
Mounting
holes
note
• The mounting holes can be used after removing the
black seals and the screws.
Caution
• Use M6 screws, which go 12 mm to 15 mm in
depth from the mounting surface of the flat screen
TV. See the side view shown to the right.
• Be careful not to block the ventilation opening at the
rear of the flat screen TV.
• Be sure to install the flat screen TV on a flat surface
because the LCD panel used in this product is made
of glass.
• The screw holes other than the illustrations above
are to be used only for the specified products. Never
use them for mounting non-specified products.
note
• Pioneer shall not be liable for any personal injury
or product damage that results from the use of
mounting items.

Side view
Mounting
holes
mounting surface
mounting bracket
Flat
(or equivalent item)
screen
tV
m6 screw
12 mm to 15 mm